broncofocused > 1993 Ford Bronco > open folder Soft Top Fab & Install > mount-bracket-fabrication-(1).jpg

File 6 of 14
Prev | Next

Share This
Url
Tag
Img
Thumb

mount-bracket-fabrication-(1).jpg To make the mount brackets, I bought 1/8" thick aluminum bar that can be found at Lowes or HD. I used some 1" wide for the bedsides and 3" wide for the cab mounts. To bend it I simply placed the measured short end into the vice and bent a 90 degree angle by pulling over the longer end.
mount-bracket-fabrication-(1).jpg | Hits: 2012 | Posted on: 5/20/07 | View original size (111.94 KB)

To make the mount brackets, I bought 1/8" thick aluminum bar that can be found at Lowes or HD. I used some 1" wide for the bedsides and 3" wide for the cab mounts. To bend it I simply placed the measured short end into the vice and bent a 90 degree angle by pulling over the longer end.