Electronic Compass Zone Map
IF THE IMAGE IS TOO SMALL, click it.
To change the OHC compass zone, hold MODE until ZonE appears in the display; release and tap MODE until the local zone number appears; do not press any button or turn the key OFF until the display returns to normal.
To calibrate the OHC compass, hold MODE until CAL appears; release, and drive slowly in circles in a clear area until the display returns to normal.
For more-detailed instructions, see this:
http://www.mitocorp.com/flash/nvs_comptemp_operations.htm--------------------------------------------------------------------------------
TSB 96-08-15 Erratic Compass & Map Lamp Operation - Vehicles Built Through 2/1/96
Publication Date: APRIL 8, 1996
LIGHT TRUCK:
1993-96 EXPLORER
1994-96 BRONCO
ISSUE: Map lamp switch and/or overhead compass function operation is irregular, and/or map lamp bulbs may burn out on some vehicles. Installation of revised parts should resolve this issue.
ACTION: Replace the map lamp, switch, compass and wiring harness with a revised Overhead Console Kit (F67Z-78519C42-AA). Refer to Instruction Sheet #7151, included with the kit, for service procedure.
The Overhead Console Kit (F67Z-78519C42-AA) includes the following:
One (1) Map Lamp Assembly
One (1) Map Lamp Button
One (1) Compass
One (1) Wiring Harness
One (1) Modification Label
One (1) Instruction Sheet (I.S. #7151)
PART NUMBER PART NAME
F67Z-78519C42-AA Overhead Console Kit
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION TIME
960815A Replace Map Lamp And Console Assembly 0.3 Hr.
See also:
