06knuckle.jpg | Hits: 2893 | Posted on: 10/26/09
| View original size (754.08 KB)
The lower BJ (MotorCraft MCS-10253) had never been removed, so this one was MUCH harder. I beat on it for a while, then tried a 6' prybar, then some WD-40, then a propane torch AND the prybar WITH an 8-lb sledgehammer finally got it out.
![06knuckle.jpg The lower BJ ([url=https://www.amazon.com//dp/B000C5HPRO/]MotorCraft MCS-10253[/url]) had never been removed, so this one was MUCH harder. I beat on it for a while, then tried a 6' prybar, then some WD-40, then a propane torch AND the prybar WITH an 8-lb sledgehammer finally got it out.](https://www.supermotors.net/getfile/764865/fullsize/06knuckle.jpg)